Water resources - Overview - Queensland
Basin & Surface Water Management Area: Daintree River
Introduction
The Daintree Surface Water Management Area (SWMA) occupies an area of 2192 sq km and is situated in tropical far north Queensland. The two main rivers in the catchment are the Bloomfield River and the Daintree River. These rivers originate in the Great Dividing range in the west before flowing in an easterly direction and terminating at the Coral Sea.
The mean annual rainfall for the 50 year period 1920 to 1969 varies between 2000mm and 3400 mm. The major population centre in the SWMA is Daintree. The topography is hilly to mountainous with vegetation consisting of rainforest. Much of the catchment is part of a World Heritage area.
Vital Statistics:
| Area: | 2,192 Km2 |
|---|---|
| Total storage volume: | no data |
| Total surface water use: | 1,706 ML/yr |
| Development category: | LOW DEVELOPMENT |
| Mean annual run-off: | 2,512,000 ML/yr |
A four-class classification system was developed to provide a simple method to communicate the status of the use and allocation of Australia's water resources in relation to sustainable water management.
It is important to recognise that adequately quantifying a sustainable flow regime or sustainable yield and consequent operating rules is a complex matter. State, Territory and scientific agencies continue to develop and apply methods and measures for determining sustainable flow regimes and sustainable yields.
This categorisation provides a general guide only. Please refer to the State and Territory Overview and Technical reports for detail on the analysis methods used.
| Category | Development status | ||
|---|---|---|---|
| 1 | <30% | Low development | |
| 2 | 30 - 70% | Moderate development | |
| 3 | 70 - 100% | Highly developed | |
| 4 | 100% | Overdeveloped |
* Water use as a percentage of sustainable flow regime (surface water) and sustainable yield (groundwater)
PLEASE NOTE:
Sustainable Yield:
No sustainable yield studies are available for this SWMA.
PLEASE NOTE:
Categorisation:
No sustainable yield studies are available for this SWMA.
This SWMA is in an isolated area with little or no development. Rainfall is distinctly seasonal and extremely variable on an annual basis. There is little demand water in this catchment due to its isolation and low population.
How saline are the surface water resources in the Daintree River surface water management area?
No data were available about the salinity of surface water resources in the Basin / SWMA for the Australian Water Resources Assessment 2000.
Major water storages
Table: Major water storage areas:
There were no major water storages reported in this area as part of the assessment
Further Information
- View the Queensland Water Resources Assessment 2000 Report
- View the Queensland Water Resources Assessment 2000 Technical Report
- Link to data available for download on the:
- Surface Water Management Areas
- Data from the 1985 Review of Australia's Water Resources and Water Use
- Link to the Map Maker to make a map using this information.
- For more information about water and other natural resource issues link to www.nrm.qld.gov.au
Key
Links to an another web site
Opens a pop-up window
